Can't print using Laserjet 4100N using Mac OS X 10.6.8
I just turned on a LaserJet 4100N and Desktop Mac OS X 10.6.8 after they were turned off for two months. They are connected by ethernet cable via a Mac Airport Extreme. The IP address of the printer...
View Articletwain scanner issue
I have been using this printer/scanner HP CM1312NFI for several years during this time one of the Windows 7 uppgrades has caused a problem with the twain scanner. I have installed the HP Print and scan...
View ArticleRe: P2015dn dead baking formater board and other boards??
As I said if you can print the config page baking will not help. You have a bad usb or network port which happens sometimes with 6-8 year old printers. They do not last forever. Check ebay for...
View ArticleRe: HP CP2025 Phantom Jam?
Right now on a working 2025 we are noticing that with mpt solenoid disconnected at J209 on the Driver PCA voltage will increase to around 24v when it tried to engage the solenoid. On our printers that...
View ArticleRe: HP Laserjet 6L printing issues
I used the method you told me but the driver didnt work so I did a windows update and miraculously while I'm searching thru the list I found a driver the matched the name of my printer and used it and...
View ArticleRe: LaserJet Pro M401dn "Power On" Sleep and "Stand-By" mode issues
Did you ever find a solution to your problem? I've experienced similar issues with the LaserJet Pro 400 series as well.
View ArticleRe: PCL XL Error - Illegal Operator Sequence - Set Neutral Axis
I did not think the postscript driver worked with my printer which is the HP 5500hdn.
View ArticleHP LaserJet Pro 300/400 (M375nw & M475dn) - Driver packages will not install
Hello all, I need some assistance with a very persistent and frustrating issue trying to get driver software packages for our LaserJet M375nw & M475dn to install correctly. We are running Windows 7...
View ArticleRe: P2015dn dead baking formater board and other boards??
Actually it wouldn't print the Configuration page before i baked it the first time...
View ArticlePRO 400 M451
I am getting a 59.C0 error that won't reset. I have replaced the DC Controller already, to no avail. Can anyone help?...
View ArticleRe: HP4000 PCL XL Error Unsupported Protocol
You may get the PCL XL error utill you autoconfigure the printer. I have networked laserjet 4050's with UPD 32&64bit PCL6 5.8.0 drivers and after installing the printer the test page gave me the...
View ArticleLaser Jet Pro 400 MFP M425dn Blue Screen
Anyone get BSOD with this printer. I have had BSOD three times using USB 3.0I read where it will give this if you connect to a USB 3.0All my USB are USB 3.0Anyone know a solution.You would think that...
View ArticleM 5035 Printer duplex problem
Hi, Here is my problem. We have a M5035 that prints light on the front side of the double-sided page. If you only print single-sided it prints fine. Coping has the same problem. (one sided to two...
View ArticleLaser Jet P2015d led error
Hello,how it's possible to solve the error showed by the image ? Thank youStefano
View ArticleHow to print white on transparant paper (HP LaserJet Pro 400 color Printer...
Hi All! I have a HP LaserJet Pro 400 color Printer M451 series. I would like to print WHITE on transparent paper, but white doesn't come. All other colors are ok, but white not. Can I print with this...
View ArticleRe: How can I reset LJ 1320 printer to factory default?
Thanks David. I got the page count to zero but envelopes still won't print. It grabs the envelope like it should but then when I send it from Word 2007 the green light blinks and the roller sounds but...
View ArticleRe: P4015/4515 firmware upgrade issue 04.170.3 Resend Upgrade problem
I have the same problem and I tried the instructions that was given. I still could not get past the solid lights. Is there a technique that I can do to get pass this... I would really appreciate the...
View ArticleRe: How can I reset LJ 1320 printer to factory default?
What happens if you leave the bottom tray open and feed an 8.5x11 sheet into the manual slot when you send an envelope. What prints if anything or does the paper also move thru the printer. If the...
View ArticleRe: How can I reset LJ 1320 printer to factory default?
Hi, thanks for replying. If I place the 8.5x11 paper in the envelope tray it does the initial grab then I print(from Notepad) and rollers make a sound but the paper does not move then the orange light...
View Article