LaserJet M2727nf wireless scanning_Windows 8.1
Hi, I have faced a problem recently with Laser Jet M2727nf.The device is connected to the laptop with Windows 8.1 by means of wireless network (Jet is connected to the wifi router). Printing is working...
View ArticleRe: OSX 10.9 Mavericks - Landscape ignored in custom sizes
Same problem with both Designjet 1055 and Designjet 800
View ArticleRe: How to print white on transparant paper (HP LaserJet Pro 400 color...
Hi Csaba, The model you stated and all other HP Laserjet colour printers use CMYK toners - CMY is a subtractive colour system ie: max CMY should give Black (the "K" or black toner is needed to provide...
View ArticleTrying to upgrade firmware - Laserjet 4250tn
At the school I work at one dept. has a Laserjet 4250tn and it was showing a message on the control panel that there was printer jam. I couldn't find any jam anywhere so I shut off the printer and...
View ArticleHP Laserjet 1000 - is it compatible with Windows 8??
IS there a driver for Windows 8 or is it pretty much garbage? Thanks!
View ArticleHP color laserjet M750 - stray magenta line(s)
Hi ! I've seen similar posts to this for other models. This is on a new unit we have and it looks like we are going to haveto send it back if possible. The stray magenta line (I'm curious...
View ArticleHP 9050dn Jamming issues
I have a printer that is constatly jamming. The jammed paper will be folded up at the registration roller. it doesn't matter what tray you are printing from. this machine has 2 paper trays not...
View Articleprinter laserjet 4300 start up stops
When I turn on printer it starts to power up and after 2-3 seconds completely dies like a circuit breaker kicks out except it will do it over and over with no reset. Anyone know enough to point me to...
View ArticleRe: printer laserjet 4300 start up stops
With the power off remove the formatter on the right side. It is held in place with two screws in the back. Now turn the power on the printer and make sure you have paper in tray 2. Wait about 1...
View ArticleLaserJet Pro 400 - M475dw, not recognising USB stick
I have been scanning to .pdf on to a USB stick for about 6 months on my LaserJet Pro 400 - M475dw. Suddenly it is saying "Insert USB Flash drive" every time I try to scan, even though there is a flash...
View ArticleRe: Trying to upgrade firmware - Laserjet 4250tn
I get to just before Step 4 and the original rfu error message comes back.
View ArticleHP9050dn Default paper type is Bond
My customer has 4 HP9050's. When our software sends a call for Plain paper for banner pages, two of the 4 ask for Bond instead of Plain paper. Banner pages preceed and follow a multipage statement...
View ArticleRe: Trying to upgrade firmware - Laserjet 4250tn
So when you see the memory start to count up, you press and hold the stop button and it go into the error? The 3 lights never become solid? If thats the case sounds like you need a formatter.How were...
View ArticleRe: laserjet P3005 no display information
our experience has been...cooking the board, everything works, except the on board network. We enabled it through the control panel. no go.ideas?
View ArticleRe: laserjet P3005 no display information
Hello, I suggest getting a jetdirect card, you can usually find them pretty cheap online. Plus it is cheaper than getting the formatter board. Hope this helps.....
View ArticleRe: HP9050dn Default paper type is Bond
Hello, go to Printer Preferences on the driver. Then, look under the Printing Shortcuts tab, find Paper Type, and make sure that it is set to unspecified, or plain. Only other work around would be...
View ArticleRe: HP 9050dn Jamming issues
Hello, have you removed the registration roll, to check if there is anything that might be catching the paper? Also, I would open the right door, lift the green latch to check if there is any torn...
View ArticleRe: PRO 400 M451
Hello, I would try reseatting the fuser, as well as, the cartridge to see if that changes anything.
View Article