HP laserjet Pro 400 m451nw - Duplex printing solutions
We have a Laserjet Pro 400 M451nw printer in our office. The printer doesn't do automatic duplex printing (double-sided) and we need to do double-sided printing. I'm new in the office and the printer...
View ArticleRe: PCL initialization string from VMS
Make your init string <esc>&l2a0o6d0e0z66F Now on ALL your data lines that have printable data... <esc>&l-72Z data data data data <esc>&l72Z data data data data Like I...
View ArticleRe: PCL initialization string from VMS
Chris, I assume the unit of measure was meant to be 600 and not 6?
View ArticleRe: Little horizontal lines at the left side of the page, printed on the HP...
That is usually a sign of a depleted toner cartridge. To test, put a sheet of paper on the manual feeder (fold down tray in front) and perform a self test. When the back edge enters the printer,...
View ArticleNetwork Config - ColorLaserJet 2605
Trying to keep an oldie going for a little longer. Seems that the network settings won't save. The printer works via USB, but not visible on the network. Tried programming the TCP/IP (auto and manual)...
View ArticleRe: PCL initialization string from VMS
To be clear, in the first string we haven't used two consecutive offset values, I just wanted to make sure I understood what Jim was advising. Here are the two strings we've used: 1....
View ArticleRe: PCL initialization string from VMS
The "s(10.5H" part is changing the pitch giving you more characters in the limited space. As you don't see any clipping of characters, they probably aren't printing far enough to the right to land in...
View ArticleHP Laserjet 600 m601 intermittently stops printing to tray 2 & prints to tray...
HP Laserjet 600 m601 Windows 7, 64-bit. Intermittently, the printer just stops printing to tray 2 and will only begin printing to tray 1 when I put paper in tray 1. I have changed the driver and tray...
View ArticleHP 500laserjet M551 printer
Having trouble with printing from the bottom tray (one for letterhead and one for bond paper). Computer tech came and reloaded software, checked all connections, etc. nothing worked. Any thoughts?
View ArticleRe: HP Laserjet 6Ldoes not work with Windows 8.1
I have tried the other driver.Its name is 6.3.9600.16384 After installation I tried the test print. It showed error. I tried to print a mail. I copied the event report into the attached file...
View ArticleRe: I am having trouble with various networked printers going off-line
Yes, I can turn the printers online and offline. However, when I turn them online, they do not print. The sleep settings are disabled so the computer stays on all the time, unless you are referring to...
View ArticleWhy does it sometimes take forever (many minutes) for each page to print?
This happens just once in a while. Any ideas? Thanks.
View ArticleRe: HP LaserJet P1606dn Duplex Printing Stopped Working Today
Update HP Support is worthless when out of the 1 year warranty. They won't even talk to you. One may think this isn't a big deal but it does say a lot for not supporting their own products. After...
View ArticleRe: HP Laserjet 600 m601 intermittently stops printing to tray 2 & prints to...
The settings for size and type are not matching from the document to the printer. Try settings tray 2 to any size and any type and see if that helps. It may just accept letter if that is your standard...
View ArticleRe: HP4700 prints dots on every sheet
Hello, As a method to minimize the possibility of label peel-off and/or adhesive migration to the drums/chanrge roller, please try printing labels from tray 2 instead of tray 1. The bend angle induced...
View ArticleRe: 2605dn error 79 resolution needed
Looks to be about a good 1 Inch clearance, converted to mm 25.4mm, so probably some kind of low profile chipset or cpu cooler, of course the specialty low profile cpu coolers all have fans, so you'd...
View ArticleRe: Network Config - ColorLaserJet 2605
Hi Since the n/w led is on and the ip showing is 0.0.0.0just as an try can u pls try to change the n/w cabel and n/w IO port. then try to take the n/w config report if you find an IP of different...
View Article