Quantcast
Channel: All Printers - LaserJet posts
Browsing all 6647 articles
Browse latest View live

Color Laser Jet CP2025 no display information

Hello HP community! I have lightly used this printer without problems for 3+ years.  When I attempt to power-on my printer, it warms-up as usual, but after the typical 5-10 seconds nothing dispalys on...

View Article


Re: LaserJet Pro M401dn "Power On" Sleep and "Stand-By" mode issues

No, the client gave up on HP and went with another vendor.

View Article


HP Laserjet CP 1518 NI

HP Laserjet CP 1518 ni has one empty color cartridge and is hung up with "replace cartridge" message.Any way to  bypass this condition to print in black only?

View Article

Re: Laser Jet P2015d led error

Hello DepotINTLthank you for the information, but I dont see the test button 

View Article

How to check if the printer supports PDF and/or postscript?

I need to programmatically check (in the client application) if the HP printer supports PDF and/or postscript direct printing.Can I do this? How? PS. Sorry if I choose a wrong place to ask this...

View Article


Laserjet CP1520nw Takes Double Time to Print Alongside a Laserjet CP1520n

Both printers aer connected througha Windows SBS 2011 Standard server and pass through a gigabit network and the signal is pushed through a shared gigabit network switch. After doing some time tests...

View Article

Re: Laser Jet P2015d led error

Actually the engine test button is located below the formatter towards the front of the formatter a little to the right of the white connector. You may have a fatal error and not a formatter issue...

View Article

Re: Color Laser Jet CP2025 no display information

Most likely you have a formatter issue. Rarely is the display the actual problem.

View Article


Re: laserjet P3005 no display information

Did you remove the memory chip from the board before baking and did you put it back on. The network port will not work without the added memory chip. If you baked with the memory chip, odds are the...

View Article


Re: Trying to upgrade firmware - Laserjet 4250tn

I get the memory count and the 3 lights flash but I can't complete the next step.  The error message keeps coming up. Initially I tried to update the firmware from a usb cable and that's how I got the...

View Article

Re: PRO 400 M451

Service manual indicates a motor failure....  

View Article

Re: Trying to upgrade firmware - Laserjet 4250tn

There is one last thing you can try before replacing the formatter. Delete the 4250 printer from your computer, then connect the printer via usb to your computer. If the computer recognizes new...

View Article

Re: Laser Jet P2015d led error

Yes, I should have been more clear. Assuming you are facing the left side of the printer, the button will be below the formatter's bottom right corner. Its not going to be on the formatter itself,...

View Article


Re: HP 3505 cuts Header/Footer in half in Landscape mode only

Before I order and spend money on a new fuser, what exactly would that accomplish?  It's fusing the ink just fine on the rest of the page.  It's like the margins are not set correctly for landscape...

View Article

Re: Laser Jet P2015d led error

ok, I've done some tests.I mounted the formatter board and hold the test button but did not print anything.If I press the green button, it flashes the fatal error led (the fourth light, starting from...

View Article


Re: Laser Jet P2015d led error

Engine error. The formatterand engine are notcommunicating.1. Unplug the printer, andthen plug it in again.2. Reseat the formattercable in the ECU.3. If the error persists,replace the formatter.4. If,...

View Article

Metered Connection

I have 2 printers connected to my HP laptop, 1 is an officejet 8620 wireless connected, which works ok.  The other is a HP Laserjet 4050 series 6 which is connect via a cable. Since I installed the...

View Article


Re: 2605dn "Non HP supply in use"

I have printed 114 pages...  Gave nearly $800 for this printer new at office max.  :(  The printer cartridges installed ARE genuine HP.  But I get this same error, and of course there is nothing wrong...

View Article

Re: HP LaserJet Enterprise 600 m602 slow printing when switching trays

~ Update ~ Just installed firmware 2302908_435019.  No change in behavior.  Still slow switching between trays. Any help from HP is greatly appreciated.

View Article

Re: Trying to upgrade firmware - Laserjet 4250tn

I'll try it Monday.  I think the warranty may be expired on the printer. 

View Article
Browsing all 6647 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>