Re: Hp LJ5500 Print Quality Issues.
The magenta tonersare several hundred dollars so it will take me awhile to fix it. I want to sort out the lines issue first. All the colors have the same streaky pattern on them not just the magenta...
View ArticleRe: Hp LJ5500 Print Quality Issues.
Issue could be the the itb since the direction of the lines is in an up and down pattern the way the paper comes out since you are feeding landscape. In looking at the bars on the left and right side...
View ArticleRe: HP LaserJet 4000N Issues
First you need to go to your computer and hit start run and type cmd and hit the enter key. Now at the prompt type ipconfig and hit enter. It will give you the ip address of the computer. Odds are it...
View ArticleLJ 5200 Exit "Jam",13.41
I have a 5200 I'm trying to repair at the moment. It keeps "jamming" as the first page exits the printer. It gets half way out and the whole printer stops. If it's printing one page, removing and...
View ArticleRe: LJ 5200 Exit "Jam",13.41
It could be a sticking registration sensor flag. When the paper passes over the sensor flag it goes down and as the back edge of the paper passes the sensor should pop back up so the next page can do...
View ArticleRe: LJ 5200 Exit "Jam",13.41
If printing more than one page, the sheet before the fuser does have print on it. The problem seems to lie at the top of the printer. I tested a print with the backdoor of the printer open, so that...
View ArticleRe: HP CLJ 5525
Hello, sorry for the late response, thank you for the advice. On this model there is no rear door and I have noticed the way the paper path feeds there are too many curves for this model to produce a...
View ArticleRe: Disabling custom format error message on HP Laserjet 3015x?
Hi, Actually in the current setting the correct tray is chosen (2), so it asks for paper of that format to be inserted into that tray. Currently it works again, so it is really not following any logic...
View ArticleRe: Color LaserJet 2605dn Error 79 with latest firmware...
I have same issue with Error 79. I tried various re-set of printer, but none has helped. When I send print job (either connected by Ethernet or USB), printer just give Error 79 and restarts. Notthing...
View ArticleCannot set tray one to be chosen to print when opened and loaded
Hi; I've been trying to set one of our LJ 600 M602 to print automatically from tray 1 when it's opened and loaded with paper (any kind of paper) and it doesn't do so. I came up with a workaround...
View ArticleRe: Color LaserJet 2605dn Error 79 with latest firmware...
I am going to say this for the last time. The firmware issue was over 1 1/2 years ago so anyone who is now getting the issue it is because your formatter has gone bad. The 79 error existed before the...
View ArticleRe: LJ 5200 Exit "Jam",13.41
If there is print then the issue is the face down delivery assembly at the top of the fuser. It is part number RM1-2490-000CN. If you remove the top cover on the right side of the assembly is a sensor...
View ArticleRe: 2605dn error 79 resolution needed
I had an error 79 and I replaced the formatter with one I had from another HP26015dn out of use, but that changed nothing : still error 79. What I did is to take out the USB connection out of the...
View ArticleRe: Color Laserjet 4700 - Upgrade a very old firmware
46.120.4 and every older firmwares to "prefix" aren't available anymore. Could someone be honest and upload .120.4 again?
View ArticleWifi Issues with HP m451dw
Hello everyone, I am using an HP m451dw printer over my wireless network (no Ethernet or USB connection). Basically, the printer is working well. All machines including the router can see it and...
View ArticleLaserjet 1606dn goes into powersave and raw print jobs do not awaken it
Our application exclusively sends raw pcl print jobs via network. We have problems with the Laserjet 1606dn as it seems to go to sleep but doesn't wake up when it receives a job. We run on Linux, with...
View ArticleUnable to print on HP LaserJet using Mac.
In the office we have some HP laserjet 200 color m251n (connected by ethernet and on individual VLAN) and nobody using mac can connect to the printer. The only thing we can do is check the cartbridge...
View ArticleLaserJet P2055DN - update new firmware 20120615
Hello.After updating new firmware 20120615 on a HP LaserJet P2055DN and installed last version drivers on server (MS Windows Server 2008 Ent R2 Rus). Sometime printerbecomes unavailablefromyour local...
View ArticleRe: LaserJet CM2320fxi B&W Printing
All color printers use a mix of the available toner cartridges to produce black. Greyscale is notorious for using more color than the normal BW mode because of all the different shades of grey. The...
View ArticleRe: Cannot set tray one to be chosen to print when opened and loaded
Set the tray to Any Type/Any Size and the printer will automatically print from that tray any time there is media loaded into it. Otherwise if you change the default tray settings from Any/Any then the...
View Article