intelligent tray selection
Hi all! Might be more of a software question, but still related to LaserJets. We are running LJ 2015 and 2055 printers with two separate paper input trays which are selected manually, based on the...
View ArticleRe: 2600n not printing red
Having same problem with the magenta cart. What screw is missing?
View ArticleRe: CP2020 leaving 2 vertical lines on printed pages
Replace the black toner cartridge if the lines are only in black.
View ArticleRe: Hp CLJ CP2025 - errors
Load the universal pcl5 driver and the errors will be gone. I would think she is having computer issues since pcxl errors only occur with the pcl6 driver and most of the rendering is done at the pc.
View ArticleRe: Laserjet cm2320 jams at tray 2 but only when paper is loaded in tray 1
I also have this same problem. Not seeing any visible problems.
View ArticleRe: Hp CLJ CP2025 - errors
Thanks DavidZuts I'm seeing the client tomorrow morning. I will try your suggestion and see if works and give feedback. But i did not think of trying the PCL5 in all honesty.
View ArticleRe: Unable to Remote through EWS
>I can print to these printers fine, and I can ping them as well. Well, the 4700dn has a EWS:http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00498146 (And if you can ping, it...
View ArticleLaserjet M2727 (copper Line) NOT working since new installation of Verizon...
Hi everyone,Just curious if anyone knows if and how I can get the Laserjet M2727 to work with fiber optic Verizon lines. They have recently been switched/upgraded from the copper lines since I had...
View Articlem601n Printer Lag/Latency
We're experiencing an inordinate amount of lag between the time a document is sent to the printer and when it actually prints, often up to and over a minute. We've never had trouble with the 601 and...
View ArticleRe: CP2020 leaving 2 vertical lines on printed pages
Replacing the black cartridge fixed it! Thanks!
View ArticleLaserjet P1505n Won't print until spool is cleared.
I work for a School district, and we just received new Dell 3010's and we are running 64-bit Win7 Pro. We are using the same model printers as last year, a Laserjet P1505n, Great little workhorse. My...
View ArticleRe: Unable to Remote through EWS
Hi Dennis, Thanks for the response. Yes I'm trying to remote in using EWS. No USB involved here; these are all networked printers. I have not yet had a chance to lock these printers down, as I have...
View ArticleRe: Unable to Remote through EWS
How are you trying to access the EWS for these printers? IP Address or Host Name? For example, I can access the same printer by going to https://192.188.1.5 or https://HP-Network-Printer. One relies...
View ArticleRe: m601n Printer Lag/Latency
USB or Network installed? Have you tried a different print driver yet? There are 3 flavors of Universal Print Driver you can experiment with, PCL5, PCL6 and PostScript. I suggest you download the...
View ArticleRe: Laserjet P1505n Won't print until spool is cleared.
First place to start is a firmware update. Navigate out to the drivers and downloads area for this printer and make sure you are up to date. Aside from that I would agree that it is a sleep issue....
View ArticleRe: Laserjet M2727 (copper Line) NOT working since new installation of...
Could you clarify your setup a little better for us? HP Printers do not have hookups for fiber cables. The only network interfaces you can use are normal Cat5 and WiFi. Beyond that the printer...
View ArticleRe: intelligent tray selection
Hello, There is no way to parse a print job name and determine which printer the job should print from. If you want to cook up something on your own then you will have to experiment with a custom...
View ArticleRe: Unable to Remote through EWS
You might need to go to the NVRAM reset then. NVRAM Reset a CP3525:http://www.fixyourownprinter.com/forums/laser/73873 NVRAM Reset...
View ArticleRe: PCL initialization string from VMS
I attached 2 copies one from 330 (as marked on the top right) using initialization string *27,"E",*27,"&l2a0o6d0e-75u-20z66F" and the one marked 349 *27,"E",*27,"&l2a0o6d0e-72u-18z66F". excuse...
View ArticleRe: PCL initialization string from VMS
Increase the value before the "z". Say change it from 20z to 50z and see what that does for you. Adjust the "z" value as appropriate increasing the value to push the text down the page. The value is in...
View Article