Re: P2055DN Can't get to menu's or NVRAM reset or factory reset
Did you fix this yet ??If not:When you turn it on, wait til it is saying 'H.P' - then press and hold the Down & cancel.....count to 5 and release the keys...it will do the rest.That should do your...
View ArticleRe: LaserJet M401dne
Have you tried disabling the 'smart install' option on the printer..It's in the 'service menu'...I've had some problems with that .......
View ArticleRe: HP LJ3005dn Part Information
I think what you have are 2 parts from other model printers...I've worked on thousands of 3005's & never seen such a part on one of them.. However, the Black part looks like one of the cassette...
View ArticleRe: Bands of toner on 6015
How old are your drums?Also the transfer cleaning unit could be at fault.
View ArticleHP LaserJet 700 color MFP M775 not reporting supply levels in WJA
Hi,I'm using WJA 10.3.90613 (10.3 SR4) and for some reason when I look under the supplies tab, it wont show a supply level gauge like it does for my other printers, so I dont know when toner needs to...
View ArticleRe: HP P3015 tray 3 jams
Hello, Are you able to print any pages from tray3? If so, how many pages will print prior to getting a paper jam? Regards,DaveK.
View ArticleRe: HP Color Laserjet 2605 smudging black toner on right side
You need to redo the lase/scanner as it appears you may not have cleaned it correctly and also it is possible it is not sitting correctly in the slot. There are a couple of nubs that have to fit into...
View ArticleExploring the limits of print resolution...for science!
Hello! Graduate student here, working on designing a high-density optical fiber array that is packed into a [very] compact bundle. To do so, I wish to print out (onto transparencies) negatives of...
View ArticleRe: Exploring the limits of print resolution...for science!
I don't have a comment about software, but I wold caution you that your project may be doomed by the resolution of the toner. While the printer can logically address a 600dpi space, I bet the toner...
View ArticleRe: Exploring the limits of print resolution...for science!
Thanks for your help, Jim. I would have to agree with your predictions. I tried printing out sample arrays, and under a microscope the grid is entirely sporatic and random. Two last questions (and a...
View ArticleRe: Exploring the limits of print resolution...for science!
I don't think that a higher dpi printer would help. Probably it would just aggravate the problem. My guess is that an injet might be able to lay down a smaller dot than a laser, but I'm not sureabout...
View ArticleHP Laser Jet P2015dn Driver
Hello Everyone, I have HP Laser Jet P2015dn printer, after installation of driver for MS Win7 64-Bit HP Universal Print Driver for Windows PCL6 available at link given...
View ArticleRe: P2055DN Can't get to menu's or NVRAM reset or factory reset
I hooked up a packet sniffer to it on a local hub and found that it was running DHCP. Managed to setup a dhcp server and login the the web interface off of the printer. I thought I tried down and...
View ArticleCM6040f trays 3-5 not seen by printer
Our office CM6040f works otherwise fine, but only seems to see trays 1 and 2. Trays 3-5 are present, but not showing up in the printer's menus. From the Windows side, the PCL6 driver is happy to accept...
View ArticleRe: Colorjet 475dw won't install on windows server 2012
Got the same problem!I cannot believe that HP didn´t get it to work after one year! I need the scan function, so i can´t take the UPD PCL drivers...
View ArticleRe: HP LaserJet 700 color MFP M775 not reporting supply levels in WJA
If they are non-HP, it won't report
View ArticleHP 9050 marking pre-printed checks
We're using preprinted checks in payroll and the printer is ghosting the MIC-R codes at the bottom of each check, causing smudges and repeats on the other checks. We installed a new maintenance kit,...
View ArticleRe: HP LJ3005dn Part Information
Thank you for the input. We received this from another group (who also sometimes repairs). That would explain much. The gear grinding was the standard problem and most likely not the actual fuser. I...
View ArticleRe: Colorjet 475dw won't install on windows server 2012
Thanks for the help. It is working now.
View ArticleRe: Duplex problem
I have the same problem except tht in my case I have Duplerx trurned OFF on the printer and ini the printer properties. It only happens from manual feed on tray one and this just started. It worked...
View Article