Quantcast
Channel: All Printers - LaserJet posts
Browsing all 6647 articles
Browse latest View live

Re: HP4700 Powerless Display and Network Issues

Problem 1 updateI left the printer on for a good 10 minutes and when I returned the display was reading"55.04.92 DC Controller Error.  Please turn off and back on". I'm currently leaving it powered off...

View Article


Envelope Printing Problems with M401dn

When printing envelopes with a LaserJet Pro M401dn, the return address is not properly fused, and there seem to be some random blotches printed in the stamp area; the main address is properly printed...

View Article


Re: Envelope Printing Problems with M401dn

Hmmm ... I could have sworn that I set the paper type to ‘Envelope’, but evidently I did not; with that restored, the problem seems to be fixed. Apparently the fuser is mighty fussy about the paper...

View Article

Re: HP Laserjet P2055DN Problem delayed printing displaying "Printing"

As mentioned above, we use static ip adresses on all our clients and printers.

View Article

Re: HP4700 Powerless Display and Network Issues

Problem sorted.  Just left with my original shadow printing problem.

View Article


Re: HP4700 Shadow printing

I printed an Engine Test Page. Should I see 4 lines close together repeated down the page?

View Article

Re: Laserjet Pro 400 Browse Master

Thanks for your reply. Tried that, but no better.

View Article

Re: Laserjet Pro 400 Browse Master

Thanks for your reply. Reviewed doc, problem doesn't seem to be the election process, but the fact that printer polls and wins. Need to exclude it from the process completely.

View Article


PCL XL error when printing on LJ P3015N over network

Hi all; One of my users lost the ability to print anything off of any LJ 3015Ns we have set up in the office. No matter what he tries to print all that comes out is PCL XL error Subsystem: KERNEL...

View Article


Re: bad print quality on left side of page

LazerJet 4240N

View Article

laser jet 4250

The problem is when every the user power on the printer she must hit the go key to put it back on line. I'm looking into the service book for any info, but if anybody could help, that would be great....

View Article

Re: HP LaserJet 400 M401dn

Sorry my original post is slightly incorrect. It pauses after every 2 sheets for about 2 seconds, then prints another 2, pauses, etc etc. If we then power cycle the printer and print out the same...

View Article

color laserjet 4600 - problem with single color (yellow) mostly doesn't print

Colors seem purpleish when printing photos.  Turns out it's a problem with printing yellow. We tried replacing the yellow toner cartridge, and that didn't fix it. In PQ TROUBLESHOOTING, the yellow page...

View Article


Re: color laserjet 4600 - problem with single color (yellow) mostly doesn't...

Hate to ask a stupid question, but I know you changed toners, but have you confirmed it is the slot and not the toner. Simple to test, go to the diagnostics menu and choose the item disable cartridge...

View Article

Re: laser jet 4250

Zack you are not making sense. Remove connection to pc or network and just have power. Now turn on the printer and see if it comes to ready. If not perform a cold reset.

View Article


Re: bad print quality on left side of page

Post a sample of the defect. Odds are the laser/scanner optics are dirty. Easy to clean. Just remove the top cover and the black box in the center is the laser/scanner. Remove cables and 4 screws and...

View Article

Re: color laserjet 4600 - problem with single color (yellow) mostly doesn't...

It's the slot, not the toner - I did what you said, and yellow printed. If the slot shutter isn't opening, then wouldn't it not print any yellow at all?  Or is it possible that it's opening briefly and...

View Article


M4555 Formatter Issues?

Replaced formatter, firmware will never upload

View Article

Re: M4555 Formatter Issues?

edayton56,  Is the MFP able to boot up at all? Does it come to ready?What have you tried so far to update the firmware? Thanks,

View Article

Re: HP4700 Shadow printing

hello, make "full calibration" 3-6 times, may solve the issue!

View Article
Browsing all 6647 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>