Re: LJ 1600 SLOW Printing
we had the same issue, replaced dc controller and that fixed it
View ArticleLaserjet P2055DN "49 err 3D910C8"
When this printer is connected to the network via builtin Ethernet, within 30 seconds or so of initializing, it briefly flashes the message on the status panel "Printing document" and then immediately...
View ArticleRe: Very slow printing envelopes - Color Laserjet 2600N
we fixed this issue by changing the dc controller
View ArticleLaserjet CP1215 "out of paper" error message
All of a sudden, my HP printer CP1215 will not print. The jobs go into the print que, but the on screen indicator states that it is out of paper. There is the correct paper type in the tray and the...
View ArticleRe: LJ 2600n slow after envelopes
we fixed this on a 1600 by changing the dc controller (same board in the 2600n)
View ArticleRe: Laserjet P2055DN "49 err 3D910C8"
Hello, I have a quick question, are you able to connect the printer to a laptop directly? Or a machine that is not on the network of the hijacked coupon issue? I am wondering if you just might have...
View ArticleRe: Laserjet P2055DN "49 err 3D910C8"
The first thing you want to do is disconnect the network cable and power on the printer. It should come to ready. Now here is where it gets tricky. On this printer there is a x button used to cancel a...
View ArticleRe: HP P3015 Not picking up paper.
Perform an engine test per the directions attached. If the test does not work with or without the formatter attached, then the engine control board is bad. If the test works with or without the...
View ArticleRe: HP P3015
Odds are there is a scrap of paper or a sensor flag stuck in the wrong position by the fuser.
View ArticleRe: laserjet p2035n won't print
If it printed a config page, then the printer is working and you have a communication issue between the printer and the computer. If usb try another cable or another usb port on the computer. If...
View ArticleRe: Laserjet 4250 41.3 error
adjust the rear paper guide. Its 2013 but that problem exists. The rear paper guide is plastic, look for a breakage in the centre
View ArticleAdjust density on HP Laserjet P2015dn printer
Hello, I use HP Laserjet P2015dn printer with Windows 7 Ultimate. I would like to ask you how to adjust the density of printing. I couldn't find any similar option in the printer's properties.Thanks.
View ArticleRe: Adjust density on HP Laserjet P2015dn printer
You have to have the tool box software loaded. If connected using network cable you can see if the web browser allows for density setting under printer settings.
View ArticleRe: HP P3015 Not picking up paper.
Thanks for the reply, I was leaning towards the ECB and the formatter, so it is nice to know there is a more credible source for a solution. I will do the test that you suggested and let you know on my...
View ArticleRe: LaserJet 1200 suddenly stopped working
Additional information on the error status. The lights on the front panel of the LaserJet 1200 printer remain green, as in normal ready state. There are no blinking or amber lights. The only error...
View ArticleNot Jammed but yellow light on, green light blinks
I have a Laserjet 1320. I've nearly stripped this thing to the gears and there is no paper stuck, at least not that I can see without using a screwdriver (HP wouldn't leave out an accessible paper...
View ArticleNot Jammed but yellow light on, green light blink
I have a Laserjet 1320. I've nearly stripped this thing to the gears and there is no paper stuck, at least not that I can see without using a screwdriver (HP wouldn't leave out an accessible paper...
View ArticleRe: HP Laserjet P3015 Jetdirect Printserver RESET
Just perform a cold reset. Turn off the printer and then turn back on. When the memory starts to count press and hold the ok button and continue to hold until all 3 light come on solid. Release and...
View Article