Re: hp LaserJet 1010 driver windows 7
Thank you so much for your simple approach to solving a hair pulling printer driver solution.
View ArticleRe: LaserJet 2605dn Color Print Problem - Vertical streaks
This is very frustrating issue. 1st trying to fine the proper customer support link will just run you in circles. Though this printer is in fact an older model that I purchased some time ago I did...
View ArticleVote for Josh device status
Hello, we have HP Color LaserJet 4700dn printer with the latest firmware 46.220.1 installed. And printer shows device status Vote for Josh. What does it mean? Is my printer hacked or what? Thank you
View ArticleRe: Vote for Josh device status
I have the same message on a few printers in my company and it seems that we're not allone:http://superuser.com/questions/736539/who-logged-into-my-printers The message is also displayed on the...
View ArticleHP LaserJet 4250
We are going to plan to upgrade the existing HP LaserJet 4250 as there is noisy and old. And the Laserjet 4250 noise level is 69 decibel (dB). We search similiar printer to upgrade and find the HP...
View ArticleRe: LaserJet 2605dn Color Print Problem - Vertical streaks
Just replace the black toner cartridge. It is defective. The color ones are ok.
View ArticleRe: Laserjet P2015 Formatter Issue Possible Solution!!!!
Just reporting another success. Will see how long it lasts.
View Articleprinter jam in back of hp LaserJet 1300 PCL 5
I have a jam in the back of my hp LaserJet 1300 PCL 5. When I open the back door, I can see the paper all crinkled up in the back but I cannot get to it to remove it. Can you please help Thanks.
View ArticleRe: Vote for Josh device status
Same here. Happened last week on April Fool's, and again this morning. Not sure if malicious or not. The affected printers are on open NATs for use outside our network. Three 4015s, and a 4700dn.
View ArticleRe: LaserJet 600 602N Font issue
Hello if you are getting wingdings printing then I would suggest switching the driver. IF you are using PCL 6, then try switching to PCL 5. Hope this helps....
View ArticleRe: Excel Printing symbols
Hello, actually it sounds like it is an issue with the users workstation. Mainly, the print driver, what driver is being used? If PCL 6, try switching to PCL 5. Also, are they printing remotely?...
View ArticleRe: LaserJet 2605dn Color Print Problem - Vertical streaks
I did not want to take the chance that buying a 85 dollar toner would not fix. Some time ago HP replaced the Cyan cartridge (not megenta as stated in origional post). And same issue diff cartridge....
View ArticleRe: LaserJet 2605dn Color Print Problem - Vertical streaks
Is this just the way HP printers work? Carts just go flakey out of the blue from NOT being used?
View ArticleRe: HP LaserJet 4250
The M602 has what is called "Quiet Mode" It is under the adminsitration menu under general settings. What is does is slow the machine to the same speed as the manual fold down tray 1 which is about...
View ArticleRe: printer jam in back of hp LaserJet 1300 PCL 5
Happens sometimes. Best to google the 1300 service manual and then look for the instructions to remove the back cover which will give you better access to the fuser where the paper is jammed.
View Articlelaser jet cp4525
The problem with this printer is it getting this error code 59.FO. I replaced the fuser drive motor. The error code was there I just read something about the ITB not working. Please help. Zack
View ArticlePower outage during firmware update for Color LaserJet 2600n
Right in the middle of updating the firmware for my Color LaserJet 2600n, the power went out. Now I can't get anything to come up on the printer. Neither the screen nor the power and error lights come...
View ArticlePage catched by printer
i have HP Laser jet P4015x printer. problem is during duplix, printer catched the page. i have try too many qualities to print but it print 4 or 5 pages and after that it cathed the page. kindly guide...
View ArticleRe: Power outage during firmware update for Color LaserJet 2600n
Managed to figure it out myself. Turned out to be pretty simple. Powered the printer off and back on and ran the firmware upgrade program again. The printer didn't restart automatically, so I had to...
View Article