Re: Trouble printing on Envelope #10 size from tray 1 of LaserJet 400 M401dne
Hello, have you tried or is it possible to try PCL 5? PCL 6, in my opinion is not as stable, plus I have encountered weird glitchy issues with PCL 6. Hope this helps....
View ArticlePrinting Excel chart fills area below line whether I ask it to or not
When we try to print some Excel charts with line or scatter graphs on any of our CP2025, CP5225 or Laserjet Pro 400 colour laser printers the print has the area under the line filled with colour and...
View ArticleRe: HP LaserJet Pro 400 Color M451dn : problem installing driver
Just found your posting, and would like to szue it, because I have an installation problem 99% - I cannot find the "smart install"I know where device manager is and I see the printer but there is no...
View ArticleHP Laserjet 3050 Paper does not feed, makes loud noise
My printer does not feed paper, makes loud noise for appx. 15 seconds. Then I get the "check mark" error saying I need paper, when I hit the ok button. Then the cycle repeats itself.
View ArticleRe: HP LaserJet Color 400 M451dn Install Problem
I followed strict your advice, but still get the 99% fault. I use Windows 7 64 bit. Any additional advice? I still have in manger imaging the printer.
View ArticleM830z Device Memory
My company just moved their operation and in my department we now have 2 M830z laser jet printers. We have several documents that we have to print quite often. With that being said I just started at...
View ArticleRe: My HP P4015 Laserjet won't stop printing garbage.
Did you read my post above. Turn the printer off. Disconnect the network cable and any cables going from the printer to a computer. Turn the printer back on. Does it come to ready? If it does if you go...
View ArticleRe: LaserJet 500 color M551
Yes, that was the problem.Thank you Do you know why that happens?
View ArticleRe: M830z Device Memory
The User Guide manual (see http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03664108-3.pdf ) describes (for both Windows and Mac OSX host systems) how to store a print job at the device. Then (again...
View ArticleHP LaserJet Pro 400 (M475dn)
During the initial setup of the printer I selected the wrong country of location, how do I change this settings? How do I get the printer back to the initial setup? I have tried some 'cold reset'...
View ArticleRe: HG282DJ scalable barcode font card in HP Laserjet 400 M401dn not detected
Thank you! I will try another card and test it. I doubt the actual slot is defect though, since the printer is brand new and never had anything slotted in there before.
View ArticleUnable to communicate to the device - Laserjet 400 - 475dn
When try to send fax from computer in windows 7 64 bits, appear this message "unable to communicate to the device" as appear in the image.The solution is install the latest software (HP LaserJet Pro...
View ArticleLaserJet 600 602N Font issue
My company Recently Purchased the above noted printer, and I noticed when I printed a document from Indesign that the font WINGDINGS did not print. It's the first font I've noticed this issue with....
View ArticleRe: HP LaserJet Pro 400 (M475dn)
I found this post on the forums now .... http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/Cold-reset-Factory-reset-HP-LaserJet-500-colorMFP-M570dw/m-p/6065423/highlight/false#M76725 Can anyone...
View ArticleHP 2600N
Using Windows 7 Pro When I select to print a page a blank sheet comes out, the I select the "Blue" button and the page I want to print does so. Can I do something to stop the blank pagers from being...
View ArticleLaserjet p2015; how to set resolution at 1200 dpi and how to change toner...
I am unable to find a screen in W7 with options for print resolution or toner density. Values for both parameters are shown in the self test configuration page (and the 1200 dpi option is an...
View ArticleRe: Laserjet 2200 on Win 7 computer
Thanks David. This worked. I would NEVER have found this on my own. I already spent half a day and got nowhere.
View ArticleRe: Laserjet p2015; how to set resolution at 1200 dpi and how to change toner...
Hi. Not a solution, but I have same problem using my mac sox 10.5, which is really annoying as the 2015 is supposed to do all the stuff we are both trying to do. I have tried all the drivers available...
View ArticleRe: HP LaserJet P1606dn Duplex Printing Stopped Working Today
After spending more than an hour on the phone with an hp tech this morning installing and reinstalling the driver, etc., I recalled that I recently printed a booklet and made some changes to the...
View ArticleRe: HP LaserJet Pro 400 (M475dn)
Just in case anyone else runs into this issue. There were two potential solutions on the series of posts linked in the previous message. The one that solved this issue for me was ... 1) Power off the...
View Article