Re: 4250 paper jam issue
I fixed the issue with the paper jams. However I am now having a issue where the paper has a vertical line of nothing like the printer is not printing on about a half inch section from top to bottom. I...
View Articlelight print/vertical line of nothing
I have a laserjet 4250 that when I print a paper it has a vertical line with nothing printed on it. It's about .5 inches wide and is just blank but the rest of the page looks ok. I changed the toner,...
View ArticleRe: Can't Install HP 4000 with JetDirect card on Windows 8.1
Ok, thanks. I'll do just that. I'll get a 620N and hope that works. Thank you! Tanger
View ArticleRe: Can't Install HP 4000 with JetDirect card on Windows 8.1
Before you order a new card, that card should work if configured correctly. First you want to perform a cold reset on the printer to have it obtain an ip address using bootp or dhcp. To perform a cold...
View ArticleRe: light print/vertical line of nothing
Sound to me like you may have an issue with dirt or dust on the laser/scanner lens. Post a sample of the problem (config page will be good) so we can confirm and give instructions to repair.
View ArticleRe: Laserjet 5225 error 10.9531
http://www.icareasc.com/ICareKM/University/TrainingMaterial/The%20German%20Laserweb/5000/CP5225/known/CP5225_10_9531%20error.pdfThe micro switch will be in the area of number 2 in the link above. In...
View ArticleRe: CP5525 - Error 99.05.56
Only info I can find:99.05.56DescriptionFirmware Install Error : IoctlSetBaudRate failedRecommended action1.Perform a clean disk from the preboot menu.2.Reload latest version of firmware via USB...
View ArticleRe: LaserJet Pro 300 color Control panel no reaction on touch.
See the attached for how to calibrate the touch screen which should solve your problem.
View ArticleRe: LaserJet Pro 300 color Control panel no reaction on touch.
Thanks for your reaction !But when I press simultaneously home, question mark and cancel the display always gioningback ti the main screen with 2 bip-bips.Also, when the display is off (Screensaver)...
View Article5550 separation roller
Hello everyone, I just purchased a used 5550 dn printer with 2 extra paper trays and the separation rollers have been removed. My problem is I don't know if that is the only part missing. Could someone...
View ArticleRe: 5550 separation roller
Finally figured out how to attach a picture. Please see attached. Thanks,Gerry
View ArticleRe: Can't Install HP 4000 with JetDirect card on Windows 8.1
DavidZuts...it WORKED!! I did exactly as you said. Doing a cold reset also resets the JetDirect card if it's installed. The complete instructions are here (from HP's site):Cold Reset Instructions Thank...
View Article8550dn will not print "Toner Door Open" Error
I have an 8550dn. I just cleaned it and put new toner cartridges in. It goes through the boot and now says "Toner door Open". I rechecked and as far as I can tell everything is locked in on te toner...
View ArticleRe: 5550 separation roller
You have the clutch for the shaft which is all there. Appears like you are missing the black plastic piece in the front. See the link...
View ArticleHP Laser jet disk M1522 MFP series disk for window 8.1
I have an disk to start this printer but only for window 7. I am using window 8.1 now and want fax letters out using office but cannot find the utilities to do it. can any sell me the HP Laser jet disk...
View ArticleRe: LaserJet 6P Print Cleaning Page problem
I am not seeing the image you are refering to. I've checked a couple other posts you've made on the subject and can't see an image there either?
View ArticleTrying to print custom paper size in 2nd or 3rd tray
Trying to print custom paper size in 2nd or 3rd trayHP Laserjet Pro 401n with third trayApple Mavericks printed from FilemakerSheet size is 5.75 x 8.125I have created custom size in page set up (tried...
View Articlem2727nf drivers for windows 8.1 64 bit
Just bought a Lenovo with windows 8.1 64 bit and tried to download printer drivers for m2727nf and could not. Warranty expired (got the printer from ex-employer) and am stuck. I would assume there is...
View ArticleRe: LaserJet 6P Print Cleaning Page problem
When you print a half test and stop the paper before it goes thru the fuser, the "image" is whatever you have printed on the page without it being binded to the paper by the heat of the fuser. If for...
View Article