First thing I would do is a firmware upgrade of the printer. These are common errors when the printer becomes confused with data it can not read. Most times the firmware upgrade will solve the issue. If not change the drivers are the computers having issues to the postscript, pcl5 or pcl6 in other words using a driver it is not currently using and see if that solves the issue.
Re: LaserJet 5200 Seemingly Random Error Codes
↧
↧
LaserJet P2035 - Win8.1 64bit Drivers - Paper Size Issue
Hi,
So I have a client who is attepting to create a custom paper size. The problem is that the driver for Windows 8.1 is very minialistic. An option I've considered to resolve the this clients issue is to install the PCL5 driver for Windows 7 64bit in compatability mode, unfortunately there isn't once available that I could find, at least not on the HP web site.
Of course there is the printer driver site ( http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3662026&swLangOid=8&swEnvOid=4063 ), but this doesn't give me enough information for my liking, I'm not 100% sure what type of driver I'm downloading and installing on the clients machine (PCLv5/6, Post Script etc).
So then the question. Where can I find a driver for a HP LaserJet P2035 for Windows 8.1 that allows my client to create custom paper sizes?
The over the top last hope option I have is to boot up VMBox and make a Win7 machine just for the printer driver... That's just far to costly for the client though.
↧
Re: hp LaserJet 1010 driver windows 7
Thanks for lot of tips. Now my HP lj 1010 works fine with W8.1 !!!
Unfortunately I was failed with another laptop with Win 7_32. Nothing helps, I tried plug-in and „Add Printer“ LPT1 or DOT4 then 3055, 3050 and all other LaserJet .... Also tried disconnect printer and install drivers from HP site – WinXP, Vista-32 and some of HP UPD drivers .... Also update device driver from Device manager.
In all cases everything stops then loading or installing driver (printer) with message like „Unable to install ...#&#####..“
In Device Manager printer is recognized as Other device/Unknown
Any FRESH IDEAS, please !!!!
↧
HP LaserJet 2200dn paper jam
Hi,
I bought an used HP LaserJet 2200dn and after I fixed the sticky solenoid (http://www.fixyourownprinter.com/forums/laser/28556) it worked fine including duplex printing.
Now I have the problem that every page gets stuck before it fed into the fusion unit.
Here are some pictures of how where the paper gets stuck.
My question is:
Does anyone have a suspicion what specifically could be the defect part and needs to be replaced/repaired?
If the fusion unit has to be replaced I would do it (saw some for 15$ at eBay).
But in general I have to think about investing money in this old printer, so I would prefer a cheap fix.
Thank you very much for your help!
↧
Re: HP LaserJet 2200dn paper jam
Remove the fuser and check the action of the exit sensor flag.
↧
↧
Re: Cartridge will not install to Color LJ CP3505
↧
Re: LaserJet 5200 Seemingly Random Error Codes
The firmware is updated. I did not mention that originally sorry. We updated to the newest version listed on the HP website when the problem started happening to no avail, version: 08.241.0. Thank you for the suggestion.
↧
Re: Laserjet 600 M603 pause between 5-10 sec during multiple page printing
I too have the same problem with HP » Manage Trays
HP LaserJet 600 M603HP » Manage Trays
HP LaserJet 600 M603.
When I try to print envelopes there is a pause of 3-5 seconds between envelopes. The job downloads to the printer in 5 seconds and only prints 2 lines. It took 5 hours to print 1500 envelopes cosisting of 2 lines
↧
Re: HP LaserJet 2200dn paper jam
If you mean the part looking like this:
It is freely moving, the spring is ok and nothing is broken.
I took out the fusion unit any way and I definetly have to replace at least the film. But this should not be the problem causing the paper jam ... in my opinion.
↧
↧
Re: Laserjet Pro 400 M401dne appears offline
This seems hard to believe that nobody has suggested anything as a possible fix. I have the same issue. Appears offline and unable to print. Now I was able to resolve one after I changed the driver to an older driver. However, the others did not fair as well. Hopefully another idea will come up.
↧
Re: HP Laserjet 1200 making loud noise and won't print
Dear Len1
Thank you so much for that detailed explanation. It worked beautifully and I have now prolonged the life of my laser jet 1220. Your description was a perfect guide. I simply followed like a sheep and I reached the end of the tunnel.
Just one little item I will add. Before pulling back on the right cover, I found that the right cover is screwed at the bottom. So first remove that screw from the right bottom. That will make it very easy for the right cover to be pulled back and the screws of the top cover to be loosened (on the rear).
Thanks again Len1.
↧
LaserJet P3015 driver_ downloaded as P3010. Why?
I downloaded the latest installation pack for LaserJet P3015d, but the downloaded pack is titled HP_LJ_P3010_Installer_CD2. Upon installation, the installed printer driver reads HP LaserJet P3010 Series PCL 6, not P3015. I do not understand why. Has anyone come across the same issue?
↧
Re: m602dn 13.D3.D3
replaced toner, new rollers, swapped duplexer, still jamming with this code.
unfortunate for me the warranty is out, and nobody knows what this code means, so it could be the main board then.
it's interesting that if the dc controller is bad, it's only affecting duplexer, not the entire print/feed system.
↧
↧
Re: LaserJet P3015 driver_ downloaded as P3010. Why?
That is because the P3015 is part of the P3010 series. This was just initial series they called this printer. The driver and all the software are correct for your printer. You can rename the printer to P3015 if you wish.
↧
laser printer 2550PS
Have been having problems with my laser printer. Sometimes it prints only the first page of a document but today it decided to only print the tail end of one. Seems to cope with text but will not print colour pictures. Any ideas please?
↧
Print on double sheet of paper
My castumer wants to print on double sheet of paper (coumpound leaf - A3 to double A4) on HP LaseJet P1606dn. How to avoid shrink of paper?
If I print on extra heavy paper (160 g/m2), it will while away lifetime of sliding mechanism?
Thank you.
↧
HP CLJ M553x Deactivate Display Sounds
Hello,
Is there a way to deactivate the display touch sounds in this device? I couldn't find any option in the menu.
Thanks in advance
Philipp
↧
↧
Re: HP LaserJet 2200dn paper jam
Do you think replacing the fusion unit would solve the problem?
↧
HP Laserjet 600 M602 - Que backing up - printing characters and symbols
HP Laserjet 600 M602 - Que backing up - printing characters and symbols. This is an intermittent issue. usually happens on a multipage page print job. Is happening on two printers. both are attached direct to the pcs. I have updated the print drivers and installed the entire software suite to each. still having problems. Below is a Jpeg and also full attachment.
http://s17.photobucket.com/user/heatherandrob/media/attorney%20title%20odd%20prints_zpsqij0hv5c.jpg.html
↧
Re: Laser CP4525 Printing Very Slow?
Thank you - thank you. I've been messing with this for a couple weeks now, unistalling and reinstalling the printer. Did the cold reset and now it prints immediately when I send a print job. It was taking up to 60 seconds to print.
↧
More Pages to Explore .....
