Re: Laserjet 4L connection to new computer
How do I connect my old HP LaserJet 4L to our Dell computer? I have misplaced the original CD to do this task. Please advise. Thx.
View ArticleRe: CE399A Envelope Feeder on M601n printer is unable to print more than one...
>Originally Posted on 'general' HP Discussion Forum Your original...
View ArticleRe: HPLJPro P1102w etc. Drivers Missing from Upated Windows 8 and...
>I didn't see any certs for dlls I was trying to see the certificates without running it. So I used 7zip to look inside.But the certificate of the basic driver in the download I mentioned before...
View ArticleRe: CP4525 colors not aligned
Perform a NVRAM reset, see the attached. This wipes any calibration settings and starts from scratch. Read the instructions as you will loose the serial number and other settings which you can put...
View ArticleRe: Paper Tray 2/Paper tray not closing properly
Looks like the claw is bent up at the bottom. It should look like a horseshoe. You can just remove the claw piece as it only shows the paper level but has no effect on the placement of the tray. With...
View ArticleRe: HP Color LaserJet 1600N colors out of alignment.
Running the calibrate routine 5 times resulted in the black being brougt into allignment but the cyan is just as far off as before. I tend to think this is a dirty sensor issue. Do you have a...
View ArticleHP Laserjet 400 print speed slow
Just recently the print speed of my HP LaserJet 400 M401n has slowed down tremendously. For months it has been working fine, but starting this week whenever I print a multiple page document it will...
View ArticleClik here to view.
2605dn black printing issues
I took my 2605dn apart to clean the imaging mirrors. Everything is back together, but the black page does not print correctly. I made full sheet color examples for each color and as you can see in the...
View ArticleRe: CE399A Envelope Feeder on M601n printer is unable to print more than one...
And ...?? Was it necessary to do that, Dennis Handley?
View ArticleRe: 2605dn black printing issues
A simple question. Was it printing black like this before you cleaned the optics or the black was fine. If it was fine, take it apart again and check your work. Make sure the ribbon connections are...
View ArticleRe: HP Color LaserJet 1600N colors out of alignment.
Everyone thinks there is a sensor. There is not. The printer lays down toner on the belt during calibration and reads the image and makes adjustments based on the reading of the pattern for each color....
View ArticleRe: HP Color LaserJet 1600N colors out of alignment.
Thanks again David. From your post you mention it lays down an image and then reads it. I must assume it reads it with a sensor of some sort. Generally when a device reads somethign and makes an...
View ArticleRe: 2605dn black printing issues
It would be helpful if you continued your previous topic, rather than start a new one:http://h30499.www3.hp.com/t5/Printers-LaserJet/2605-problem-printing-black/m-p/6486372
View ArticleOutput bin is full
does anybody know what this means? I have removed the paper and put some back, but I keep getting this message, have no idea what it means
View Articledoesn't count down when copies are asked for
Unless the printer runs out of paper, 3 copies of a page become a lot more...Driver (see what's printing) counts a request for 3 as 1, never counts it down unless I cancel it.The printer screen says...
View ArticlePrinter taking to long to start
Well. This is a very long problem to explain.I have been having trouble since i got these pc's (3 of them) with Windows 8 (inspiron 660s)all 3 having trouble to print on hp printers (the cannon has no...
View Article2605dn output "dirty"
Pages printed from the manual paper feed seems to come out "dirty". The entire length of the page seems to be printed with a bit of a "haze". I've calibrated and run the printer through the cleaning...
View ArticleRe: Upgraded firmware on LJ P4515x and now it says resend upgrade
Thanks, that part worked for me, but now with the extra Tray 3 installed, it boots up to "checking paper path" and no print jobs come out. I've taken the extra tray out for now. I've also removed all...
View ArticleLoud Noise when printing
We just installed the HP Laser printer 601D and when printing copies it makes a very loud sound. Has anyone else experienced this? The copies print OK but the loud noise is annoying.
View ArticleRe: LaserJet 2605dn "79 Error"
To see if the printer or something else, when it does not print, go to the reports menu on the printer and then try to print a config page. If it prints, then you have a driver or communication issue.
View Article