Re: Laser CP4525 Printing Very Slow?
Did you bother to read the 2 posts above yours. Asking the same question when answers are all ready provided wastes your and others time.
View ArticleRe: Using an HP 1100 LaserJet printer via USB port
I'll check it out - thanks. Do you know if there any difference with the mini-centronics cable with the 25-pin parrallel connector? I believe the cable needs to be a male connector to the printer.
View Articlebeeping when printing - laserjet pro400mfp M425DN
Every time I go to print to the laserjet pro400 mfp m425dn it has a loud beep. Any suggestions of how to turn this off??
View ArticleRe: CP3525dn, networked -- default duplex for all users (embedded web server)
The problem is that most modern printer drivers reset all print job related settings to factory defaults at the start of the print job in order to achieve a known state, and then build up all the...
View ArticleRe: Which external Jetdirect server with Laserjet Pro 300?
Yes, I'm using a standard HP USB cable (I've tried a couple, just to make sure it wasn't faulty too). The ew2500 is new, and I've tried it in a couple of other printers. In a Laserjet Pro 400...
View ArticleHP Laserjet Pro 400 M475DN Delayed sending on fax
Hi there I have issues with my fax option in my HP Laserjet M475DN It is coming up with the message delayed send and pending. I cant receive or send any faxes at all How do i resolve this? thanks Liam
View ArticleRe: beeping when printing - laserjet pro400mfp M425DN
Is the printer plugged directly into a wall power outlet. People sometimes plug them into the backup battery ups box which will make a noise since this printer draws a lot of power. If plugged into one...
View ArticleRe: Using an HP 1100 LaserJet printer via USB port
The one I posted is exactly what you need to the laserjet 1100 as it has the mini -centronics interface.
View ArticleRe: HP LaserJet Series 4 error code 41.2 message
dear user, this problem belongs to scanner beam, or laser scanner glass moved from original position. so if you are a technical person, you can slove , change laser scanner assembly
View ArticleRe: HP LaserJet 8100n printing erratically.
So, I followed your instructions and was able to print any type of document normally. I then contacted my local network admin to see if he could load the drivers the same as I did. He could not, as it...
View ArticleLASER JET 5550DN
I would like to find out why this printer is jamming from only tray two, but prints ok from tray three. I am not sure but it might be the paper pick up assy. could anybody help me out on this. Zack
View Articlehp laserjet 500 color m551..only one user can print color
Everyone on the network can print on this printer but only in black.....I have one user that can print in color. I have checked her settings...added the printer to my computer and mimicked her...
View ArticleRe: LASER JET 5550DN
I found out that the jamming is coming from tray 3 that is printing 11x17. not tray two as the customer said before. sorry. Zack
View ArticleRe: HP LaserJet 8100n printing erratically.
As a general rule if a printer prints any document correctly and others not correct, the issue will never be the printer but on the software side. Loading the driver locally as I suggested showed this...
View ArticleRe: 11 x 17" prints from cp5225 won't match original design.
Hello, Have you tried adjusting the side registration through the control panel? Thanks,Dave I work for HP.
View ArticleRe: Laserjet M601 errors
Hello, Does the 13.A2.D2 jam error occur everytime the paper level gets to a certain level? If so, I am very interested in understanding your issue and helping you resolve it. Thanks,DaveK I work for...
View ArticleRe: HP 4700
Hello, Is there any repetition to the dot pattern? If the dots are showing up on the front of the page and are at a pitch of 38mm, then the issue is likely related to the toner cartridges. You will...
View ArticleRe: Laserjet 4700
Hello, If possible, could you please scan the Diagnostics page and save as an attachment for viewing. Thanks,Dave
View ArticleLaserjet M601 Problem printing merged documents
I just installed this printer to replace a worn out Dell printer. The printer is working except when I try to print a merged document, the word processing program (Microsoft Word or Open Office)...
View ArticleRe: hp laserjet 4000 - unexpected paper size in tray 2 load A4l! help.
i have this hp laserjet 401 dn ,,and i have this problem for some time now,,ok,,i start the printer ,,then is online,,i click to print something from my pc,,then>job processing> then i get...
View Article