Re: 49.4c06 Service Error on LJ 4200
Try clear all print Que's then upgrade the firmware.This code usually caused by a corrupt job in the print Que.
View ArticleLaserJet 400 M401n seen but won't print
Installed LJ 400 M401 on network. Running Win7 Pro on desktop. Can see it in HP Web Jetadmin, display/change settings. Try to print is a no go! Cannot enter Primary & secondary DNS IP address....
View ArticleRe: Color Laserjet 3600 dn + cartridge lock repair
I have the 3600 dn reassembled and the 3 colors work but not the black. I marked the MDA to makes sure I could confirm alignment after assembly and everything seems lines up.The three colors print...
View ArticleColor LaserJet 2605 won't print
My ColorLaserJet 2605 was printing fine - I finished a job, then fed it the next job, and from that time on, all it says is "printing document" with the green light flashing - but nothing ever prints...
View ArticleRe: Colour Laserjet CP2025dn 128mb Limitations/Expectations
Good Morning,These are printers used by the public so they get varying amounts of use, some have had 20k prints while others have done 140k. Many have had maintenance kits but couldn't say which ones...
View ArticleRe: 2605dn error 79 resolution needed - resolved
Has this issue been resolved yet? If not I suggest the moderator spend more time fixing the problem and less time worrying about whether we're speaking in English or not.
View ArticleRe: Colour Laserjet CP2025dn 128mb Limitations/Expectations
The output tray has a flag that raises as the tray fills...when the tray gets full, it sends that error & disables the printer to prevent JAMS.... Don't allow that condition.... You can add memory...
View ArticleRe: LaserJet 400 M401n seen but won't print
Please check if the device is able to print internal test pages (using control panel). Please note the print que and job status when job is sent to printer (double click the printer icon from printers...
View ArticleRe: Color LaserJet 2605 won't print
As a basic step, re-install the printer driver. If the device is connected using a USB cable, try switching the port (at computer) or test with another cable.
View ArticleRe: LaserJet 2605dn "79 Error"
Mknder, Hats off to you!! It worked! Problem solved, got admiration, and 3 little rewards from the printer's owner as well. Thank you for posting solution! CJ
View ArticleRe: LaserJet P4515 shadowed print on letterhead
I hope that you are using HP genuine toner cartridge and have configured the tray with correct type (Letterhead) and size of paper. Use the same paper type and source tray selection from printer...
View ArticleWhich Maintenance kit do I get for a Laserjet 600 M602 Printer?
The printer's status page is indicating that the maintenance kit is at 20% so I'd like to order one to be ready but the status page list two part numbers, 110V-CF064A and 220V-CF065A. Can I assume...
View ArticleRe: Laserjet CP3505n 10.92.03 Cartridges Not Engaged error
I have been following the suggestions in this post. What I am seeing is I can place 2 cartriges in the printer, and all the mecanisms work correctly, any two. When I try to open the door to place...
View Article500 sheet tray for HP LaserJet Pro 400 M401 - Not Recognized
Hello, I purchased a LaserJet 400 M401n with the optional 500 sheet tray ("tray 3"). I have placed the printer on the tray and filled it with paper. The internal "tray 2" has no paper in it. When paper...
View ArticleRe: 500 sheet tray for HP LaserJet Pro 400 M401 - Not Recognized
I think you have to go into the printer's Properties and enable the tray option.
View ArticleRe: Which Maintenance kit do I get for a Laserjet 600 M602 Printer?
Yes...if you're in AMERICA it will be 110V....
View ArticleRe: Colour Laserjet CP2025dn 128mb Limitations/Expectations
I've never calculated it out..The printer is rated at 20 pages per minute...that's all the SPEC's state..Best way would be to update a couple of your 50 & see how much it speeds the through-put.
View ArticleRe: Printing 3 5/8 x 6 1/2 Envelopes Wihout Single Manual Feed
You're probably gonna have to scout for an envelop handler option (I.E a printer that supports that option)...and buy that combination.I'm sorry I can't recommend which model/brand..
View ArticleClik here to view.
Re: 500 sheet tray for HP LaserJet Pro 400 M401 - Not Recognized
Thank you, DoublHH. I do not see any options for tray 3, only 1 and 2. My expectation is that it would show up under Paper Settings next to the settings for Tray 1 and Tray 2, but it is not shown...
View Article