Re: Updated Frimware on a HP LJ 4515 and now am having a network error
I have not seen it on a firmware upgrade, but it sounds like the format PCB has gone bad.Can you print via usb?If you have another machine try swap the format pcb and see if the works.
View ArticleRe: HP Laser Jet P2015dn Driver
Have you up graded the firmware?http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=3662049&ac.admitted=1392913310429.876444892.199480143
View ArticlePaper in tray 1 doing the twist
When ever paper is fed from tray 1, the second it starts to move, it twists. If it takes the paper at all then the right side gets crinkled and folded and then jams. I've cleaned the take up roller and...
View ArticleTray 1 Manual Feed Question
I am in the process of printing 100 programs in increments of 25. I have set the printing properties to utilize the Tray 1 Manual feed. The problem I am having is the printer is not automatically...
View ArticleRe: Paper in tray 1 doing the twist
Doing some minor surgery I found part of a sticker in the papers path.
View ArticleRe: Tray 1 Manual Feed Question
Depends on the printer. If you have a menu on the printer or a toolbox on the computer, set tray 1 for the size and type of media you are asking for. You could also try to set the tray to paper size...
View ArticleRe: HP Laser Jet P2015dn Driver
How is firmware going to effect the driver on the computer? When you bring up devices and printers does the printer show? If it does then it has to show in the other programs. Try using file and then...
View ArticleRe: Updated Frimware on a HP LJ 4515 and now am having a network error
Go into the printer initial settings and make sure the nic card is turned on. By default is should be but perhaps something happened during the upgrade and the card was disabled. Wost case hold onto...
View ArticleColor LaserJet M551dn error: 49.38.07
We have a Color LaserJet M551dn which is giving the error 49.38.07. It also says to turn the printer off an on again. Power cycling does nothing and I don't seem to be able to do a cold reset....
View Articlep4515
The problem is that after running more then 20 prints some of the words prints out very dark. only on three or four pages. I check the fuser it looked good. The transfer roller was replaced. they...
View ArticleRe: Color LaserJet M551dn error: 49.38.07
Error 49 usually signifies a firmware error (which could be due to a formatter problem), but it can, in some cases, be invoked by some system sending a 'rogue' job (not necessarily a conventional print...
View ArticleLaserjet 1150 - new cartridge - suddenly full black page
Hello everyone. I am not new here but it seems that way. I have an issue with a laserjet 1150 I use for quite some time now. It is old but still works just fine. I ordered a new tonercartridge...
View ArticleRe: Empty page after Excel printing after change UPD PCL5 driver from 5.2 to...
Were to find plain PCL driver?
View ArticleCold Rest -
The past month, I had the printer support people come in and tell us to cold start the printer. Everyday I have been doing this? What causes this problem where I have to cold start the printer...
View ArticleCM1312series-win7-full-solution-AM-EMEA1-v5.1 / Windows 8.1 / hp Laser Jet...
CM1312series-win7-full-solution-AM-EMEA1-v5.1 can not be installed on Windows 8.1 for hp Laser Jet 1312cm nfi MFP Hi, can someone tell me how to install CM1312series-win7-full-solution-AM-EMEA1-v5.1...
View Articleprinting blank pages
Printer was printing almost blank pages, even though the ink levels appeared very high. Put in new ink - still printing almost blank pages. Acting like there's no ink even thought it has plenty of ink.
View ArticleRe: Cold reset HP Laser P3005dn
Can you explain the problem that the reset was suppose to solve?
View ArticleRe: Laserjet 600 M601
Thanks for that tip. It did solve the problem I was having on my LJ M602.
View Article