It will always change back. Just change to yes and hit enter and then press the item key to get to the next item. The easy way to hook to a network is to perform a cold reset by holding the online button while turning on the printer and continue to hold until cold reset appears in the menu. Release and when the printer comes to ready, wait 2 minutes and then go to the test menu and print a test page. On that page will be the new network settings the printer has given itself. Use the hostname in place of the tcp/ip address to load the printer on each computer as local tcp/ip. By using hostname even if the ip address changes it will not matter since the computer looks for the host name which will not change.
↧