Hard to tell how much skew since we really need to see it all the way across the bottom and not just the left hand side. In any case it could be a simple as a small piece of debris on one side of the feed channel that comes up from the bottom. Get yourself and stiff file folder and cut it down to lets day 4 or 5 inches across. Now feed the folder up from the bottom with first the left edge of the folder all the way to the left and then feed again with the right edge all the way to the right. Do it with the toner removed and the top cover open so you can see the folder ad it comes into the print path. Odds are it will dislodge something. Now it could also be an issue with the tray itself. I have seen a few where the cover over the left side front of the tray over the separation roller housing is missing or not fully seated and that can cause paper skew and in most cases cause paper jams. Good Luck.
↧