Quantcast
Channel: All Printers - LaserJet posts
Browsing all 6647 articles
Browse latest View live

Re: laser jet p4515

Printing from tray 1 will determine if the fuser is the issue. Just keep tray 2 open and load paper on tray 1. If the printer prints ok without issue, then yes the fuser is the issue.

View Article


HP LaserJet M603 hangs after printing HP-UX jobs

We have the new HP Laserjet M603dn printer for HP-UX printing and Window user printing.Windows users printer Word, Excel, etc... files and have no problems until we send a HP-UXfile to the printer...

View Article


Re: LASER JET M601N

Glad you were able to get them up and running. Quick question, when you put them on the network did you reinstall these machines? Or just connect them to the network, also are they pulling the driver...

View Article

laserjet 8100 dn. printing

it it printing lighter on top of page.  I have replaced the toner, fuser and transer roller.  any ideas??ThanksBarbie

View Article

Officejet 6600 (all-in-one) mysterious dissappearance

Win 7 64, SP 1. HP 6600 connected over wifi to network. Printer was disconnecting from wifi when it went to sleep. Have replaced cable to phone line (with 2 wire) and established a static IP address....

View Article


Laserjet CP5525 - Problems on Network Printing - Mac

Hey there!I'm using a CP5525 Printer with my Mac in a local Network.Recently, i had big problems printing things over the Network. Today i tried to print a 17mb - 80 Pages PDF over the network,the...

View Article

Re: Laserjet CP5525 - Problems on Network Printing - Mac

When you used the network cable, was it a patch cable or a crossover?By printing through the usb I believe you have eliminated the Jet direct card.

View Article

Re: Laserjet CP5525 - Problems on Network Printing - Mac

Hi there!I tried multiple cables, the last has been a Cat5e Patch

View Article


Re: Officejet 6600 (all-in-one) mysterious dissappearance

The phone line has nothing to do with the network.You need to look at the wireless connection or hard wire Ethernet connection which has a much bigger plug the the phone line.

View Article


Re: laserjet 8100 dn. printing

How are you running the paper portrait or landscape?

View Article

Access 2013 documents cannot be printed

Settings and hardware:Windows 8, 64 bitOffice Professional 2013, Product ID: 00212-75550-97713-AAOEMPrinter: HP Laser Jet M2727nfPrinter Driver: M2727nf MFP UPD PCL5 Printing documents in Access 2013...

View Article

Re: Officejet 6600 (all-in-one) mysterious dissappearance

According to the electronics guy, HP needs a 2-wire connection to the phone line rather than a 4-wire connection because the 4-wire connection gives too much feedback and keeps knocking the printer off...

View Article

Re: HP LaserJet 400 M401dn

The printers in question do not print PDFs for the most part. The primary fuction of these printers is printing out documents from SAP. It is not limited to any specific type of document though. It...

View Article


Re: Access 2013 documents cannot be printed

Hello, is the message appearing on the printer? Or on the workstation?

View Article

Re: laserjet 8100 dn. printing

Hello, when you say light do you mean the top of the print does not appear at all? Or is it faded and then goes to normal? Also, does this just happen at the top of the page or does it shift as you print?

View Article


Can I Add an Embedded Print Server to my 1320?

Is it possible to obtain an embedded print server for a LaserJet 1320 (essentially converting it to a 1320n)?  Or is my only option to use an external print server?

View Article

Re: LaserJet 2605dn "79 Error"

Thanks so much for the advice, MKnder! I followed your steps and it worked wonderfully! :-)

View Article


Re: HP LaserJet M603 hangs after printing HP-UX jobs

Have you tried this patch?http://ftp.hp.com/pub/softlib/hpuxjava-patchinfo/index.html

View Article

Re: laser jet p4515

Start by upgrading your firmware, it sounds like you have a corrupt file.

View Article

Re: Which print driver inf file to use for each OS?

Try going to a PCL 5 driver.There is way to much going on in a universal driver.

View Article
Browsing all 6647 articles
Browse latest View live