Re: Strange printing defects Laserjet 4350
Back-track what you did to correct the original problem....that's usually the correct procedure for such an issue.....
View ArticleRe: Laserjet 500 Color M551 error "13.b2.d2 jam in tray 2"
Clarification: I am getting 13.B2.D2 as well as 13.B9.D2 errors.
View ArticleRe: CP5525dn will not initialize
Thanks for the reply. There are no options installed. From what I can see in the user guide and service manual, the RAM (1GB) is on the formatter board and no option to install more. If so, it is...
View ArticlePrint multiple copies
Windows 8. Have a 15-year-old LaserJet 2100 printer.It is installed on my HP PC as PCL5 (as shown in Control Panel).The only issue I have is that it will NOT print multiple copies.Is there a fix for...
View ArticleLaserjet M601 lost network after firmware upgrade
I did a firmware upgrade to a Laserjet M601dn printer for a teacher. After doing the firmware upgrade I lost the NIC connection. The light for the connection will blink momentarily when I turn it on,...
View ArticleP4014
I have a customer that has managed to get 3 paper trays stuck in 3 different machines. They said trays will not come out as hard as they pull. What is strange is it is one department that it keeps...
View ArticleRe: Laserjet 500 Color M551 error "13.b2.d2 jam in tray 2"
Hello Paul-Andre, Do you have any ideas on what may have occurred just prior to the start of the 13.B2.D2 jams? Jam removal?Part replacement?Printer transportation? How many pages are on your printer?...
View ArticleRe: P4014
What I have seen and it was with the 42X/43X series is the cover over the separation roller in the front part of the tray somehow gets in the up position after the tray is inserted and prevents the...
View ArticleRe: Laserjet M601 lost network after firmware upgrade
Do the firmware upgrade again. If you did not use a usb drive to do the upgrade use one this time.
View ArticleRe: CP5525dn will not initialize
Upgrade the firmware using a usb thumb drive. Go to the hp site and download the bdl firmware file and read the instructions for installing using usb thumb drive. I would think the current operating...
View ArticleRe: Strange printing defects Laserjet 4350
http://www.lbrty.com/tech/articles/4200/4200_ground/4200_ground.html
View ArticleHow can I get total pages printed on my LaserJet 3055?
I have a lovely LaserJet 1012 that is not supported in Windows 7, but there is a workaround that involves setting up a Vista driver as though the printer is a LaserJet 3055. It works, though...
View ArticleRe: CP5525dn will not initialize
David, Thanks for the tip, but still no go. The firmware upgrade appeared to go ok. The download from the usb worked, and there were messages about sys1 and 2 upgrades and at some point it entered the...
View ArticleRe: HP CP5225 - Jamming (paper delivery assembly)
I started having the same issues after I replaced the Fuser Assembly. The new fuser is slightly different than the original. If you look at the top and to the rear of the fuser, (as it's positioned in...
View ArticleRe: Print multiple copies
I agree with DavidZuts See thread http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/laserjet-1200-won-t-print-multiple-copies/m-p/4951321#M132420 for an example (albeit for a different...
View ArticleRe: Printing issue when printing 2 pages on one on Laserjet Pro 200 M251nw
The configuration report prints out. The test page prints out. Both normally
View ArticleHP Laser jet CP 4035
We have an issue with out hospital printer. CP4525. There is a small vertical line going down the left margin almost off the edge of the left side of the paper. Changed out magenta because it looked...
View ArticleRe: Laserjet pro 400 m401n installation/printing issues
I know this is a year later, but I have the exact same problem. The laserjet Pro 400 M401n, straight out of the box, won't work via USB with an HP EliteDesk that is only 8 months old. After a few...
View ArticleUnable to enbale tray 3 on CP5520
I'm a bit stuck and I am trying to figure out how to enable tray 3 on cp5520? I've tried using different drivers but nothing appear to work. This printer has been problematic since day one. I can see...
View Article
