First thing you need to connect the ethernet cable to a switch or router. When done you need to do a cold reset on the printer. To do a cold reset turn on the printer and when the memory starts to count, press and hold the green check mark button until all 3 lights come on solid. Release and scroll down to cold reset and hit the check mark button. When the printer comes to ready wait about 2 minutes and then go to the information menu and print the configuration page. You will get 2 pages with the second page having the network settings. Use the IP address on the second sheet to add the printer to each computer using the add printer, local printer, create port and in the drop down choose standard tcp/ip and then just follow the directions.
↧