Hi!
I upgraded firmware on my HP LJ P3015n using HP Web JetAdmin. Something failed during the upgrade.
I was upgrading to the new version 07.171.2 - 15 Nov 2013
--------------------------
I found out that the NIC is still working but not the WEB GUI.
I now tried a new firmware upgrade but that was not possible.
--------------------------
Then I found on the internet that I could perform this operation to make the error go away and try to upgrade the firmware again:
Clearing RFU Error Message
1. Turn the printer power off.
2. Power on the printer and watch for the memory count to begin.
3. Holds down the STOP button when you see the memory counts begin. Continue holding down the STOP button until all three printer control-panel lights flash once and then remain on. This might take up to 10 seconds.
4. Press the SELECT (Checkmark) button and then the MENU Button.
5. Scroll down until you see “Clear All RFU Errors”.
This removed the error message on the printer and it stated Ready
--------------------------
I now tried upgrading using FTP but got stock on error:
> Netout :Software caused connection abort
426 Download failed, corrupt file.
--------------------------
I tried to download the package "ljP3015_fw_utility_07_171_2.exe" and upgrade from Windows.
It states Successful but it's not working.
--------------------------
I now printed a config page and found a message on the page for the Jetdirect
INCOMPLETE F/W - MUST DOWNLOAD
--------------------------
And here we are, any one that could give me any advice?